J&J's Heating & Air ConditioningFireplaces and HVAC, Lic. #1086420 Español (805) 699-1112
  1. Home
  2. Fireplaces
  3. Gas fireplace service

Gas fireplace cleaning and service in Santa BarbaraClean glass, a steady flame, and a safety test.

A gas fireplace has no ashes, so it gets forgotten. Once a year we take the glass off, clean what you can't reach and test it before the season.

Last reviewed November 9, 2026 · CA Lic. #1086420

5.0 ★ 100 Google reviews5.0 ★ 26 Yelp reviewsFree estimatesFlat rate pricingLic. #1086420In the trade since 2016
A modern fireplace in a concrete wall with its glass front removed and a drop cloth over the bench and sofa
The short answer

A gas fireplace should be serviced once a year, ideally before the first cold nights. On a J & J's service visit we lay drop cloths, remove and clean the glass, clean the burner, pilot and firebox, reset the logs to the manual, check the vent and controls, and finish with a gas leak and carbon monoxide test. Call or text (805) 699-1112 for the flat rate for your unit.

How often
Once a yearBefore the heating season
Price
Flat rateQuoted when you book
Ends with
Gas and CO testEvery visit
Your floors
Drop cloths firstVacuumed before we leave
What to look for

Signs a gas fireplace is due for service.

None of these mean the fireplace is finished. They mean it's time for someone to open it up.

Signs a gas fireplace is due for service.
What you noticeWhat it usually isOn a service visit
White haze on the inside of the glassMinerals from combustion that bake on over timeGlass removed and cleaned with fireplace glass cleaner, gasket checked
Flames uneven, with gaps along the burnerDust, pet hair or spider webs in the burner portsBurner pulled, ports cleared, air shutter checked
Pilot flame small or yellowA dirty pilot orificePilot assembly cleaned and the sensor voltage measured
A smell the first few times you light itDust burning off after months unusedFirebox and compartment vacuumed. A gas smell is different: leave and call 911
Slow to light, or it takes a few triesA weak sensor, old receiver batteries or a dirty igniterTested and noted, with a price if a part is needed
Embers no longer glowEmber material breaks down with useEmbers refreshed where the manual allows

Not sure what it needs?

Text a photo of the unit and its label. It often saves a trip.

How it works

A service visit, step by step.

Step through the visit to see what comes apart, what gets cleaned and how it ends.

Fig. 1 · Interactive
123456

Before. Hazy glass, a few blocked burner ports and an uneven flame. It still lights, which is why most people wait too long.

  1. Down from the door to the hearth before a tool comes out.

  2. Removed, cleaned on both sides, and the gasket checked. On a direct vent unit the glass is part of the seal.

  3. Lifted out, brushed and set back in the positions the manual shows.

  4. Ports cleared so the flame is even from end to end.

  5. Cleaned, and the millivolts measured so you know how much life the sensors have left.

  6. Connections checked with a gas detector, and the room tested for carbon monoxide with the fireplace running.

Illustration. Steps vary by model, and we follow the manufacturer's service instructions for your unit.
What's included

What we do.

Everything here is part of the job, not an extra.

  • Glass off and cleaned

    Both sides, with the right cleaner, and the gasket checked.

  • Burner, pilot and firebox cleaned

    Ports cleared and the compartment under the firebox vacuumed.

  • Logs reset

    Back in the positions the manual shows, so the flame burns clean.

  • Vent and controls checked

    The vent termination, the receiver, the remote and its batteries.

  • Gas and CO test

    Every gas fireplace visit ends with a gas leak and carbon monoxide test.

  • A straight report

    What we found, what can wait, and a price before any repair.

From our reviews

In customers' words.

Real reviews for this kind of job, quoted word for word from Google. Read all of them by theme.

“We are so glad to have found Jeremy again and just used his company for a gas fireplace service. They are great people, arrived on time and are very knowledgeable with a high level of expertise. The job was completed efficiently and they left the place clean! Great level of overall service.”

Steve C.
Gas fireplace service, on Google

“Quick reply and cleaning done. Helpful talking about fireplaces replacement options. Would hire again!”

Karen H.
Fireplace cleaning, on Google

“Based on the existing 5-star reviews, I called J & J Heating to give me a quote for closing off a heating duct before my kitchen remodel, and for an opinion on my gas fireplace insert. Jeremy came out and cleaned my fireplace insert, so it now looks almost new. He told me what I could do to make it work better for me, and he also checked out my heating system, including inserting a new filter. Jeremy is one of the nicest service providers that I've ever had at my house! Given that I am in the process of collecting bids for my kitchen and bath remodel, Jeremy also provided me with the names of contractors whom he recommends and has worked with. He will be following up with a quote for the additional heating system and fireplace insert work. If you need anything done to do with HVAC or a gas fireplace insert, look no further and call J & J now!”

Julie V.
Insert cleaning and heating check, on Google

“Jeremy did a great job fixing & testing our gas fireplace. Very happy with his work. He laid a blanket down to keep things clean and completely vacuumed fireplace when complete...fireplace operates and looks great.”

Dave H.
Gas fireplace repair, on Google

“These brothers are friendly and thorough professionals. They responded quickly to our gas fireplace insert problem (pilot wouldn't light after years of neglect and soot buildup). They took care of the ignition, cleaned the filthy glass and had everything working perfectly again at a reasonable price. Highly recommended!”

Paul M.
Gas insert repair, on Google

“Super professional. On time. Fast repair of our gas fireplace, and then checked all the seals with his gas monitor for both our units. Nice guy too! Highly recommend.”

Lauren R.
Gas fireplace repair, on Google

Want the same care at your house?

Estimates are free and every price is written down before we start.

How the job goes

From the first call to the last check.

You know the price before any work starts.

  1. Book before the season

    September and October are the easy months. By the first cold night the schedule is full.

  2. Protect the room

    Drop cloths over the floor and nearby furniture.

  3. Open, clean, reset

    Glass, logs, burner, pilot and compartment.

  4. Light it and test

    Flame checked, then the gas leak and carbon monoxide test with you there.

Cost

What it costs, and what changes the price.

Service is priced flat rate for your unit and quoted when you book. If the fireplace isn't working at all, the visit starts as a $220 diagnostic instead.

Annual serviceCleaning, reset and safety test for a working fireplace.
Flat rate
Fireplace diagnosticFor a gas fireplace, insert or log set that isn't working right.
$220
After-hours diagnosticWhen a technician is available. This is the starting rate.
from $308

Rates checked November 2026

  • The type of unit

    A log set in an open firebox is quicker than a sealed direct vent unit with glass, media and a fan.

  • How long it has been

    Ten years of buildup takes longer than one.

  • More than one fireplace

    Tell us how many when you book and we'll plan one visit.

  • Parts

    If a sensor or battery pack is failing, you hear the price before we replace it.

See pricing, line by line for what goes into an estimate, and before you hire for licensing, permits and warranty.

Ready for a free written estimate?

One flat rate number, explained line by line.

In Santa Barbara County

Gas fireplace cleaning and service near you.

Questions

Common questions.

Anything else, call or text me.

How often should a gas fireplace be serviced?

Once a year. Manufacturers call for an annual inspection by a qualified technician, and a yearly visit keeps the glass clear and catches a weak sensor before the cold night it fails.

What does a gas fireplace service include?

Drop cloths, glass removed and cleaned, burner and pilot cleaned, firebox and compartment vacuumed, logs reset to the manual, vent and controls checked, and a gas leak and carbon monoxide test.

Does a gas fireplace need its chimney swept?

Gas burns much cleaner than wood, so there's usually little to sweep. The vent still needs to be checked for nests, corrosion and loose joints, and a gas log set in an old masonry fireplace should have the flue inspected.

Why is there white film on my fireplace glass?

It's a mineral deposit from combustion. Left for years it can etch the glass for good, which is one reason to clean it yearly.

Can I service it myself?

You can clean the outside and, on many units, the glass once it's cold. Leave the burner, pilot, gas connections and log placement to a technician. A log in the wrong spot makes soot and carbon monoxide.

When is the best time to book?

Late summer or early fall. You'll get your pick of times, and the fireplace is ready when the weather turns.

Do you service fireplaces you didn't install?

Yes. Most of the fireplaces we service were installed by someone else.

Contact

Call or text Jeremy.

Tell me about the room or the system and we'll set up a free estimate. For a repair, text me a photo of the unit first. It often saves a trip.

(805) 699-1112
Address
511 E Gutierrez St, Santa Barbara, CA 93103
Hours
Call or text to schedule. After-hours appointments when a technician is available.
Estimates
Free, with flat rate pricing
Serving
Santa Barbara County: Santa Barbara, Goleta, Hope Ranch, Montecito, Summerland, Carpinteria, Santa Ynez, Solvang and Buellton
License
CSLB Lic. #1086420 (C-20), active. Workers' comp insurance on file with the CSLB.
Call Text